HOW TO USE YOUR NEW E-CIG        by E-CIG.Net

 

Please read the "How to use you new E-Cig when it arrives" and watch the video below.

 

The Electronic Cigarettes from E-Cig.Net are cutting edge and revolutionary in their time.

We are the Manufacturer of our Ecigs and we are always evolving to bring you a more affordable and efficient product each day.

The feedback our customers give, helps improve the Esmoking experience for everyone in the future.

 

We offer two lengths of Ecigs;

87mm ecig (which is the same size as a traditional cigarette

107mm ecig (resembles an Ultra or a 100's cigarette)


 

 

 

 

 

 

 

HERE IS A INFORMATIONAL VIDEO THAT DESCRIBES THE FUNCTIONALITY OF HOW ELECTRONIC SMOKING WORKS;

Even though the Ecigarette products (The Ecigs, Cartridges, and  Charger) in the VIDEO below are a larger style ecig, the functionality of how E-Cigs work remain the same; and for this reason we have allowed the video to run on our website. Please Note - We do not Manufacture or Sell the larger heavy model ecig, shown in the video.

When purchasing you will receive the newest cutting edge products that look, weigh, and feel as close to a traditional tobacco cigarette as possible. Please Click here to see the type of E-Cigs we offer for sale.



 

 

How to use you New E-Cig when it arrives:

 

Do not puff on the E-Cig until you have replaced the Fake Filter with a Real Filter, you may damage the atomizer or your ecig.

 

1.)Remove your E-Cig from the protective plastic packaging.

 

2.)Pull the Fake Filter off the Ecigarette.  The Fake Filter is for packaging purposes only.

(You can tell the filter is Fake because when you take it off and look down inside of it, it will be empty inside)

 

3.)Remove a Real Filter from the blue packaging.  Pull the clear plug out of the Real Filter

(dispose of clear plug) then slide the new filter on the ecigarette, where you pulled the Fake Filter from.


4.)Your Ecigarette is now ready to puff on.



Charging Your new E-Cig from E-CIG.Net


1.)The battery is the longest part of the ecigarette and has the L.E.D. light at the end of it.  To unscrew the battery, simply hold the filter side of the ecigarette and turn the battery counter clockwise.

 

2.)You are now ready to screw the battery into the charger.  Turn the battery clockwise till it is tight in the charger.  Do not over tighten the battery when screwing it in to the charger, just make it snug.

 

3.)The L.E.D. light at the end of the battery will blink 3 times when you plug the charger into a power source, letting you know the battery is charging properly. (Make sure the power source has a surge protector or a sudden power surge in your home may damage the ecigarette battery or the charger)

 

4.)Once the ecig battery is charging the charger will show a small illuminated light on the top of charger. When charging the ecigarette battery, the light will be a constant red color; toward the end of the charge in about 20 minutes the small illuminated light will turn a solid green color when the charge is fully complete.

 

*** DO NOT CHARGE YOUR ECIGARETTE BATTERY OVERNIGHT OR FOR MORE THEN AN HOUR; YOU WILL DIMINISH THE LIFE OF THE BATTERY OR EVEN CAUSE THE BATTERY TO MALFUNCTION AND QUIT WORKING PROPERLY. ***

 

5.)Unplug your charger from the power source; Unscrew your ecigarette from the charger by turning it counter clockwise; Screw the charged battery back into the atomizer/filter, tighten - but do not over tighten. The battery and the atomizer should fit snug and there should be no gap showing between the two pieces.

 

Is your E-Cig not producing any Vapor:


If you are puffing on the ecigarette and no vapor is coming out and you have just charged the battery, you will need to change your filter.  If you still get no vapor, this means your atomizer is burned out or damaged. Click here to purchase a new Atomizer or go to the buy menu above and choose 'Buy E-Cig Atomizer'

 

 

 

 

Please Note:

If there is a problem with your E-Cig and you believe it is malfunctioning or is a manufacturer defect. You will need to send the E-Cig to Capital Innovation Enterprises 21001 N Tatum Blvd Ste 1630-487, Phoenix, AZ 85050 with a prepaid envelope (in the amount of $2 dollar) with your return address and name.  We will not ship any replacement items with out the defective or malfunctioning items first returned to us.  We will examine the defect and make sure the ecig has not been damaged or mishandled by the user.  In the event the product is a manufacturer defect we will replace it within 30 days of your purchase date.  This is our standard procedure for replacing defective product.